Misura di livello in serbatoio
Proservo NMS5

Misura di livello in serbatoio - Proservo NMS5 ©Endress+Hauser

Alta precisione nella misura di livello di liquidi, d'interfase e di densità

Il misuratore di livello in serbatoi Proservo NMS5 è progettato per la misura ad alta precisione del livello di liquidi in applicazioni di misura fiscale o di controllo dell'inventario. Esso soddisfa esattamente le esigenze di gestione delle scorte, di controllo delle perdite, di risparmio dei costi totali e di funzionamento sicuro.

  • Vantaggi

    • Misura due livelli di interfase pulita e la gravità specifica di fino a tre fasi liquide

    • Profilo di densità del liquido attraverso il serbatoio (profilo del serbatoio) e lo strato superiore (profilo I/F)

    • Uscita allarme certificata SIL2 (min., max. e campo)

    • Parti bagnate” completamente separate dal circuito...

  • Campo applicativo

    Per la misura di: Prodotti oleosi (greggio, prodotti raffinati, carburanti, oli alimentari), GPL/LNG, prodotti petrolchimici, chimici, interfase acqua/prodotto, alimenti, prodotti alimentari liquidi.

    • Attacchi al processo: flange

    • Temperatura: da -200 a...

Caratteristiche e specifiche

Indietro

Details

  • Principio di misura

    Servo/Float Tank Gauging

  • Caratteristica / Applicazione

    Misura estremamente accurata di livello, interfase e densità del liquido

  • Alimentazione / Comunicazione

    85 … 264 V c.a.
    20 … 55 V c.a./20 … 62 V c.c.

  • Precisione

    ±0,7 mm (±0.03")

  • Temperatura ambiente

    Standard:
    -20 … 60 °C
    (-4 … 140 °F)
    Opzionale:
    -40 … 60 °C
    (-40 … 140 °F)

  • Temperatura di processo

    -200 … +200 °C
    (-328 … +392 °F)

  • Pressione assoluta di processo / limite massimo di sovrapressione

    0,2 barg … 25 bar
    (3 … 363 psi)

  • Parti bagnate

    316 SUS

  • Attacco al processo

    DN80 … 150
    3 … 6"

  • Distanza massima di misura

    Standard: max. 47 m (154 ft)

  • Comunicazione

    4-20 mA HART
    Modbus
    V1
    WM550
    BPM
    Spazio per marchio
    4 contatti relè

  • Certificati / Approvazioni

    ATEX, FM, CSA, TIIS, NEPSI, WHG/Prevenzione di troppo pieno

  • Approvazioni di sicurezza

    SIL2

  • Limiti applicativi

    Tubo di calma o fili guida per applicazioni turbolente
    Campo di misura max. con approvazione per misura fiscale: 28 m (92 ft)
    Consigliato dislocatore in PTFE per applicazioni con elevata viscosità
    La misura d'interfase richiede una differenza min. di 0,100 g/ml tra gli strati

Documenti / Manuali / Software

Accessori / Parti di ricambio

Nr
Order code
Specification
  • 11
    • Order code 71273740

      Cavo di misura, 316L, 0.15mm dia., 60m

      Cavo di misura in 316L. Diametro 0.15mm, lunghezza 60m. Per: Proservo NMS80/81.

  • 11
    • Nr 11 Order code 017803-0066

      O-ring, cover drum housing, SS, FKM

      Size: D158mm, d3.5mm. Usage: NMS5/NMS7.

    • Nr 11 Order code 017803-0035

      O-ring, cover drum housing SS, silicone

      Size: D158mm, d3.5mm. Usage: NMS5/NMS7.

    • Nr 11 Order code 70109105

      O-ring, coper., custodia tamburo. SS,NBR

      Dimensione: D158mm, d3.5mm. Materiale: NBR. Coperchio custodia tamburo, Acciaio Inox, NMS5. Per: NMS5/NMS7.

    • Nr 11 Order code 70109106

      O-ring, drum housing D158-d3.5 CR

      Size: D158mm, d3.5mm. Material: CR (Chloroprene Rubber). Part: drum housing cover, stainl. steel. Usage: NMS5.

    • Nr 11 Order code 70109107

      O-ring, drum housing D158-d3.5 PTFE

      Size: D158mm, d3.5mm. Material: PFA. Part: drum housing cover, stainl. steel. Usage: NMS5.

    • Nr 11 Order code 017803-0033

      O-ring, calibration window, NBR

      Size: D60mm, d3mm. Usage: NMS5/NMS7.

    • Nr 11 Order code 70106018

      O-ring, calibration window, CR

      Size: D60mm, d3mm. Material: CR (Chloroprene Rubber). Usage: NMS5.

    • Nr 11 Order code 017803-0041

      O-ring, calibration window, silicone

      Size: D60mm, d3mm. Material: Silicon rubber. Part: calibration window cover, NMS5. Usage: NMS5/NMS7.

    • Nr 11 Order code 017803-0036

      O-ring, calibration window, FKM

      Size: D60mm, d3mm. Material: FKM. Part: calibration window cover, NMS5. Usage: NMS5/NMS7.

    • Nr 11 Order code 56004518

      O-ring, calibration window, PTFE

      Dimensione: D60mm, d3mm. Materiale: PTFE. Coperchio finestra di taratura, NMS5. Per: NMS5.

    • Nr 11 Order code 017803-0030

      O-ring, display cover, HNBR

      Size: D113.90mm, d3.53mm. Material: HNBR. Part: terminal/elec. compartment. Part: NMS/NRF display. Part: NRF/NRR/NAB terminal. Usage:NMS5/NMS7, NRF560, NRR261, NAB560.

    • Nr 11 Order code 017803-0040

      O-ring, terminal cover, NBR

      Size: D123.5mm, d3.5mm. Material: NBR. Part: terminal box. Usage: NMS5/NMS7.

    • Nr 11 Order code 71070894

      Giunto PTFE+anello, tarat. fines., Zona0

      Imballaggio anello piatto + PTFE. Per: NMS5/NMS7.

  • 21
    • Nr 21 Order code 017800-0111

      Cover, display module, Aluminium

      Display window cover. Color: E+H gray. Material: aluminium casting. Usage: NMS5/NMS7, NRF560.

    • Nr 21 Order code 017800-0112

      Cover, terminal box, Aluminum, NMS

      NMS terminal box cover. Color: E+H gray. Material: aluminium casting. Usage: NMS5/NMS7.

    • Nr 21 Order code 017800-0113

      Cover, drum housing, Alu, NMS531/NMS534

      6x bolt M6-18, 6x washer. Material: aluminium. Usage: NMS5.

    • Nr 21 Order code 56004307

      Cover, drum housing, SS, NMS5

      Acciaio inox. Per NMS5.

    • Nr 21 Order code 56004295

      Calibration window, Alu, NMS531/NMS534

      4x bolt M6x14, washer. Material: aluminium casting. Usage: NMS5.

    • Nr 21 Order code 56004296

      Calibration window, SS, NMS5, O-ring

      6x bolt M6x14, washer. Material: SUS304. Usage: NMS5.

    • Nr 21 Order code 56004297

      Taratura finestra, SS, NMS536, O-ring

      Acciaio inox,con M6x18 dadi,rondella (6) Per NMS5.

    • Nr 21 Order code 71070909

      Calibr. window, SS, Zone0,NMS532/535/536

      6x bolt M6x22, washer. Material: SUS304. (Gasket type) Usage: NMS5.

  • 31
  • 32
  • 33
  • 34
    • Nr 34 Order code 017800-0007

      Alarm output, 4x contact, I/O 3

      4x Contact output, 4x Contact Input. Usage: NMS5/NMS7.

    • Nr 34 Order code 70109108

      Alarm output, 2x contact, I/O 3, TUV OSP

      2x Contact output, overspill protection TUV, 2x Contact input. Usage: NMS5/NMS7.

  • 35
  • 36
  • 37
    • Nr 37 Order code 56004442

      Oper. I./C.O., temperatura

      I/O-3,T-AMP temp. in loco, con cornice. Per: NMS5/NMS7.

    • Nr 37 Order code 70106035

      Upgrade kit oper. I./C.O., Ex d temp.

      Operation input and contact output with Ex d spot temperature. T-Amp and I/O-3 module assembly with aluminium chassis. Include stud, screw, spring washer, wiring harness. Usage: NMS5/NMS7.

    • Nr 37 Order code 70106032

      Upgrade kit oper. input/contact out

      I/O-3 with 52013652 cable for CPU. 52013653 cable for terminal, chs., set. Usage: NMS5/NMS7.

    • Nr 37 Order code 56004441

      Operation input/contact out, carrier

      I/O-3 with chassis, stud, screw, nut. Usage: NMS5.

    • Nr 37 Order code 56004491

      Spot temp. with Chassis

      T-AMP spot temp, with chassis. Usage: NMS5/NMS7.

    • Nr 37 Order code 56004490

      Spot temp. input T-AMP Upgrade KIT

      T-AMP,with,70106033 cable, connector. Cable 70106034, connector (terminal). Chassis, spacer, washer, screw set. Usage: NMS5/NMS7.

    • Nr 37 Order code 70106027

      Spot temp. Ex ia, carrier

      EExia T-AMP, with plastic case, Chassis. Usage: NMS5.

  • 40
  • 41
    • Nr 41 Order code 52013660

      Cablaggio, mod. Ter.-COM-1/RS485/BPM

      Cablaggio tra il terminale e il modulo. Morsetto 6, 7, 2c, Connettore nero 10P, connettore rosso con circuito stampato. Per: NMS5/NMS7.

    • Nr 41 Order code 52013650

      Wiring harness, Term.-HART passive mod.

      Wiring harness between terminal and module. Terminal 6, 7, 2c, 10P black connector, red connector with PCB. Usage: NMS5, NMS7.

    • Nr 41 Order code 70106037

      Wiring harness, Term.-HART active mod.

      Wiring harness between terminal and module. Terminal 6,7, 2c, 10P black connector, red connector with printed circuit board. Usage: NMS5/NMS7.

    • Nr 41 Order code 52013657

      Wiring harness, Terminal-Mark Space mod.

      Wiring harness between terminal and module. Terminal 20, 21, 22, 23, 4c, 10P black connector, 4P brown connector. Usage: NMS5, NMS7.

    • Nr 41 Order code 52013648

      Wiring harness, Terminal-ENRAF BPM mod.

      Wiring harness between terminal and module. Terminal 6, 7, 2c, 10P black connector, 2P brown connector. Usage: NMS5, NMS7.

    • Nr 41 Order code 52013653

      Cablaggio, modulo Terminal-I/O-3

      Cablaggio tra il terminale e il modulo. Terminal 8-18, 8c (output), 3c (input), 2x 10P connettore nero, connettore marrone 13P. Per: NMS5/NMS7.

    • Nr 41 Order code 52013652

      Cablaggio I/O-3-TCB

      Cablaggio tra I/O-3 e TCB, 9cores, 9P connettore marrone. Per: NMS5/NMS7.

    • Nr 41 Order code 52013655

      Cablaggio, modulo Terminal-I/O-5

      Cablaggio tra il terminale e modulo di uscita 4-20mA. Terminal 20-23, 4c, 10P connettore nero, 4P del connettore marrone. Per: NMS5/NMS7.

    • Nr 41 Order code 70106036

      Wiring harness, Terminal-COM-4 module

      Wiring harness between terminal and module. Terminal 24, 25, 2c, 5P black connector, 4P brown connector. Usage: NMS5/NMS7.

    • Nr 41 Order code 70106033

      CPU, T-AMP Ex d module cable

      Cable with connector for TCB. Usage: NMS5/NMS7.

    • Nr 41 Order code 70106034

      Wiring harness,Terminal-T-AMP Ex d mod.

      Wiring harness between terminal and module. Terminal 24, 25, 26, 3c, 5P black connector, 3P brown connector. Usage: NMS5/NMS7.

    • Nr 41 Order code 70105996

      Wiring harness,Terminal-T-AMP Ex ia mod.

      Wiring harness between terminal and module. Terminal 24, 25, 26, 3c. 5P black connector, 3P brown connector. Usage: NMS5/NMS7.

    • Nr 41 Order code 70105995

      CPU, T-AMP Ex ia module cable

      EExia cable with IS tube for TCB. Usage: NMS5.

  • 42
  • 43
  • 44
    • Nr 44 Order code 70103938

      Display module 4line, 3key optical

      Grafico a 4 righe. NMS5 / NMS7: softwareV4.27. successivo o uguale. NRF560: software successivo o uguale V1.94. Per: NMS5 / NMS7, NRF560.

  • 51
  • 52
  • 53
    • Nr 53 Order code 56004257

      5x measuring wire, 28m, d=0.15mm, 316

      5x wire d=0.15mm, 5x ring. Material: 316L. Usage: NMS5.

    • Nr 53 Order code 71114403

      Measuring wire 0.15mm 28m 316L, ring 316

      Usage: NMS5.

    • Nr 53 Order code 56004255

      5x cavo, 16m, d=0,2 mm, Alloy C

      5x cavo d=0,2 mm, 5x anello, Materiale: Alloy C. Per: NMS5.

    • Nr 53 Order code 56004914

      Measuring wire, 0.2mm, AlloyC, 16m

      AlloyC 0.2 wire, 16m, AlloyC ring. Usage: NMS5, TGM5

    • Nr 53 Order code 56004256

      5x measuring wire, 16m, d=0.4mm, PTFE

      5x wire d=0.4mm, 5x ring. Material: PTFE. Usage: NMS5/NMS7.

    • Nr 53 Order code 56004912

      Measuring wire, 16m, PFA>316L, 0.4 mm

      PFA coated 0.4 wire, 16m, PTFE O-ring. Usage: NMS5, TGM5.

    • Nr 53 Order code 017800-0241

      10x wire ring, 316

      10x wire ring made of 316 to connect measuring wire with displacer. Usage: NMS5/NMS7, TGM5.

    • Nr 53 Order code 017800-0242

      10x Wire ring, PTFE>316

      10x wire ring made of PTFE>316 to connect measuring wire with displacer Usage: NMS5/NMS7, TGM5.

    • Nr 53 Order code 017800-0243

      Wire ring, AlloyC

      Wire ring made of AlloyC to connect measuring wire with displacer. Usage: NMS5/NMS7, NMS80/NMS81/NMS83.

    • Nr 53 Order code 017800-0252

      Displacer, 50mm, 316

      Displacer 50mm: 316. Incl. 1m fixing wire d=0.5mm. Incl. measuring wire ring: 316. Usage: NMS5.

    • Nr 53 Order code 56004339

      Displacer, 50mm, guide rings, 316

      Displacer 50mm with guide rings: 316. Incl. 1m fixing wire d=0.5mm. Incl. measuring wire ring: 316. Usage: NMS5.

    • Nr 53 Order code 70105994

      Displacer, 50mm, PTFE

      Displacer 50mm: PTFE. Incl. 1m fixing tube PTFE>316. Incl. measuring wire ring: PTFE. Usage: NMS5, NMS7.

    • Nr 53 Order code 017800-0271

      Displacer, 50mm, AlloyC276

      Displacer 50mm: AlloyC276. Incl. 1m fixing wire d=0.2mm. Incl. measuring wire ring: AlloyC276. Usage: NMS5.

    • Nr 53 Order code 017800-0263

      Displacer, 70mm, 316

      Displacer 70mm: 316. Incl. 1m fixing wire d=0.5mm. Incl. measuring wire ring: 316. Usage: NMS5.

    • Nr 53 Order code 017800-0267

      Displacer, 110mm, 316, zone 0, LP/MP

      Displacer 110mm: 316. Low/mid pressure model Incl. 1m fixing wire d=0.5mm. Incl. measuring wire ring: 316. Usage: NMS5.

    • Nr 53 Order code 70104684

      Displacer, 110mm, 316, zone 0, high

      Displacer 110mm: 316. High pressure model. Incl. 1m fixing wire d=0.5mm. Incl. measuring wire ring: 316. Usage: NMS5.

    • Nr 53 Order code 71083820

      Displacer, 50mm, 316, zone 0

      Displacer 50mm: 316. Incl. 1m fixing wire d=0.5mm. Incl. measuring wire ring: 316. Usage: NMS5.

    • Nr 53 Order code 71134069

      Sblocco, 30mm, cilindrico, 316, Zona0

      Displacer 30mm: 316. Incl. 1m fixing wire d=0.5mm. Incl. measuring wire ring: 316. Usage: NMS5.

    • Nr 53 Order code 71134070

      Displacer, 40mm, 316, zone 0

      Displacer 40mm: 316. Incl. 1m fixing wire d=0.5mm. Incl. measuring wire ring: 316. Usage: NMS5.

    • Nr 53 Order code 71134071

      Displacer, 50mm, guide rings, 316, zone0

      Displacer 50mm with guide rings: 316. Incl. 1m fixing wire d=0.5mm. Incl. measuring wire ring: 316. Usage: NMS5.

    • Nr 53 Order code 71134067

      Displacer, 70mm, guide rings, 316, zone0

      Displacer 70mm with guide rings: 316. Incl. 1m fixing wire d=0.5mm. Incl. measuring wire ring: 316. Usage: NMS5.

    • Nr 53 Order code 71134068

      Displacer, 110mm, guide rings, 316,Zone0

      Displacer 110mm with guide rings: 316. Low pressure model. Incl. 1m fixing wire d=0.5mm. Incl. measuring wire ring: 316. Usage: NMS5.

    • Nr 53 Order code 71134072

      Displacer, 50mm, AlloyC276, zone 0

      Displacer 50mm: AlloyC276. Incl. 1m fixing wire d=0.2mm. Incl. measuring wire ring: AlloyC276. Usage: NMS5.

    • Nr 53 Order code 71134095

      Wire hook, SUS304, L=100

      Material: SUS304. Bolt, nut, washer. Usage: NMS5, TGM5.

    • Nr 53 Order code 71134096

      Wire hook, SS400, L=100

      Material: SS400. Bolt, nut, washer. Usage: NMS5, TGM5.

  • 75
  • Predecessore

  • Successore