Cleanfit H CPA475
Questo prodotto non è più disponibile.
Cercare la nuova versione nella sezione predecessore / successore o contattare l'ufficio Endress+Hauser locale.
Documenti / Manuali / Software
-
Technical Information
Cleanfit H CPA475
Retractable assembly for pH, ORP measurement under sterile conditions
Informazioni tecniche (TI) -
Technical Information Topcal S CPC310
Fully automatic measuring, cleaning and calibration system in hazardous and non-hazardous areas
Informazioni tecniche (TI) -
Istruzioni di funzionamento
Cleanfit H CPA475
Armatura retrattile di processo
Manuali operativi (BA) -
Manufacturer Declaration
TSE/BSE free
Certificati (ZE) -
SD CleanFit Servicekits / Spare part kits
CleanFit Wechselarmaturen / Retractable assemblies
Documentazione speciale (SD) -
Technical article: Automated Retractable Assemblies
Inserting and extracting hermetically sealed process sensors
Pubblicazioni (PU)05/04Inglese -
White Paper-Addressing "Impossible to Measure" pH Applications in the Inorganic Pigments
White paper explaining how automated, retractable pH systems provide a solution in the process measurement of pH in difficult pigment applications.
Soluzioni industriali (SO)12/01us -
pH 測定セレクションガイド
産業プロセスにおける pH 測定
Brochure di competenza (CP)08/15Giapponese -
CP00010C pH measurement in industrial processes for US market
Selection and engineering guide for your industry and application
Brochure di competenza (CP)04/15Inglese -
Measurement and control aspect of pH using inductively coupled with
bidirectional Memosens technology in flue gas desulfurization process
White Paper CP971C pH measurement and control in a power utility is an integral part of process. The scrubber efficiency is highlydependent on the pH. Numerous opportunities were revealed for saving time, as well as the cost and materials in power plants. In afossil fuel power plant, the chemical energy stored in coal, oil, natural gas, shale oil, oxygen and air is converted into thermal, mechanical and finally into electrical energy. In other words, water is heated to steam, which spins a steam turbine. The steam turbine drives an electrical generator.
Brochure di competenza (CP)04/11Inglese -
CP01202C pH Sensors:Calibrate, clean, perform a calibration check
or...?
This white paper will address Knowing when to do a pH sensor calibration versus a calibration check How to properly clean a pH sensor How to perform a pH sensor calibration A decision tree for step by step guidance
Brochure di competenza (CP)02/12Inglese -
pH-Messung zur Produktunterscheidung
in der Brauerei. Höhere Genauigkeit mit Topcal S CPC310.
Kurz vor der Abfüllung kommt der Moment der Wahrheit. Das Bier muss einwandfrei sein, das Etikett in der Maschine das richtige, das CIP-Medium und das Wasser oder das vorher abgefüllte Produkt komplett aus der Leitung ausgeschoben.
Esempi applicativi (CS)09/08Tedesco -
Maintaining pH in yogurt production
CPC310 Autocal system controls cleaning and calibration of CPS491D non-glasspH sensor in yogurt productions
Esempi applicativi (CS)06/10Inglese -
CleanFit, CleanFit H, CleanFit P, FlowFit W
Codice del prodotto: CUA451-, CPA875-, CPA871-, CPA475-, CPA474-, CPA473-, CPA472D-, CPA472-, CPA471-, CPA450-, COA451-, CCA250- Regione: Russia (TR CU) Ente approvante: EAC Numero di approvazione: TC № RU D-DE.AL32.B.02544
MiscellaneousRusso
Accessori / Parti di ricambio
-
-
Order code 71217191
Manual Kits CPA475 2013
-
Order code 51506844
KIT CPA475 piston gel hand
-
Order code 51503717
KIT CPA471/472 retr.pipe Gel hand short
-
Order code 51503715
KIT CPA 471/472 retr.pipe Gel pn.short
-
Order code 51503775
KIT CPA471 cylinder ss short
-
Order code 51506842
KIT CPA475 electrode guide compl. G11/4"
-
Order code 51506841
KIT CPA475 electrode guide complete
-
Order code 51506835
KIT CPA475 APV connection
-
Order code 51506836
KIT CPA475 VARIVENT connection
-
Order code 51506837
KIT CPA475 dairy fitting DN50
-
Order code 51506838
KIT CPA475 Tri Clamp 2" connection
-
Order code 51506834
KIT CPA475 flange DN50 connection
-
Order code 51506833
KIT CPA475 flange ANSI 2" connection
-
Order code 51506839
KIT CPA475 rinse housing M G1/4"
-
Order code 51506840
KIT CPA475 rinse housing G11/4" M G1/4"
-
Order code 51506408
SET DI O-RING IN EPDM PER CPA475
-
Order code 51518385
SET DI O-RING IN EPDM PER CPA475
-
Order code 51506407
SET DI O-RING IN pfm (Viton) PER CPA475
-
Order code 51518386
SET DI O-RING IN pfm (Viton) PER CPA475
-
Order code 71064624
CPA471/2/5 all seals w/o medium contact
-
Order code 51502874
-
Order code 51502873
KIT CPA47x electr. proxim.switches
per retrofit su portasonda pneumatici CPA471/472/475
-
Order code 71329949
KIT CPA47X: Throttel check valve
-
Order code 51517522
Splash protection cap for assemblies
-
Order code 50080430
Protective sleeve wide for KCl-electrode
-
Order code 51518182
Protective pipe short f.process assembly
-
Order code 71162343
Kit CPA471/472/475: Retr. pipe KCl pneum
Version for direct assembling of the sensor without disassembling the pipe For pneumatic versions of CPA471/472/475
-
Order code 71162344
Kit CPA471/472/475:Retr. pipe KCl manual
Versione per montaggio diretto del sensore senza smontare il tubo per CPA471/472 e CPA475 tranne versione CPA475 con attacco al processo G11/4"
-
Order code 71162345
Kit CPA475: Hubrohr KCl Hand G11/4"
Version for direct assembling of the sensor without disassembling the pipe
-
Order code 51503730
KIT CPA47x pneu.connection G1/8 AD6 10p
-
Order code 51503731
KIT CPA47x:stop bolt with handle (1 pc.)
-
Order code 71361237
Kit Sensor output interface
-
-
Successore
